BCS inn i 2024 - veien videre.
Ny tråd, nye muligheter.
Tråd om BCS inn i 2024. Kurs i skrivende stund 6,60-7 kr etter nytt kvartalspresentasjon med lite substans, men heller ikke røde flagg.
Tråd om BCS inn i 2024. Kurs i skrivende stund 6,60-7 kr etter nytt kvartalspresentasjon med lite substans, men heller ikke røde flagg.
Redigert 10.05.2024 kl 09:07
Du må logge inn for å svare
Ikke_viktig
22.07.2024 kl 14:47
1797
Det er mye svada som blir spurt om her inne. Men når man ikke skjønner hva greia er så hjelper det så lite. AI kan bare hjelpe deg frem til brønnen. Du må faktisk stikke hodet ned i vannet og skjønne hvordan du drikker... Når man ikke skjønner de mest elementære tingene så finnes det ikke håp.
R&D tar tid. BCS har med ny labb fått nye muligheter for å fin-tune teknologien for å kunne klare å produsere det som trengs av materialer. Det er bare snakk om hvor lang tid det tar før gjennombruddet kommer. Det kan allerede ha kommet ref siste nyhet om milestone alert. Men det kan også være bare et steg på veien.
Men om det var gjennombruddet så vil endelige kontrakter kunne komme her etterhvert... Og det er nå nærmere enn det var før!
R&D tar tid. BCS har med ny labb fått nye muligheter for å fin-tune teknologien for å kunne klare å produsere det som trengs av materialer. Det er bare snakk om hvor lang tid det tar før gjennombruddet kommer. Det kan allerede ha kommet ref siste nyhet om milestone alert. Men det kan også være bare et steg på veien.
Men om det var gjennombruddet så vil endelige kontrakter kunne komme her etterhvert... Og det er nå nærmere enn det var før!
Greenlook
22.07.2024 kl 14:28
1807
Jeg har lenge vært bekymret for at BCS står igjen på perrongen når toget går. Per nå har ikke BCS noe annet enn penger i banken og en haug med lønnsforpliktelser til ansatte. Håper på positive nyheter i august, men var også sikker på det i januar og august for 1 år siden. Håper Odd melder om oppsigelse på neste oppdatering.
solb
22.07.2024 kl 13:11
1837
Flere syke hjerner utfolder seg i fri dressur her nå. Håper på å gjøre et varp av billige aksjer. Ikke mange å få tak i? Dere får låne noen flere hos Nordnet for å presse ned kursen først.
Mammon
22.07.2024 kl 12:15
1884
Pengebingen holder til neste år så er det game over ala ALT og Lifecare
Fellesnevner for disse er borderline scams 🤣
Fellesnevner for disse er borderline scams 🤣
Solid State
22.07.2024 kl 12:13
1841
nå har vel ikke BCS noen ferdig utviklede CO2 produkt de kan selge enda eller ………..
Ikke_viktig
22.07.2024 kl 10:07
1936
Disse produserer ikke ved å forbruke CO2 i selve produksjonsprosessen slik BCS kan. Det er her BCS er helt unike.
Macro1
22.07.2024 kl 09:52
1949
Ikke_viktig
22.07.2024 kl 00:13
2121
Solid-state batteries (SSBs) aim to replace traditional lithium-ion batteries by eliminating the volatile liquid electrolyte. Carbon nanofibers (CNF), carbon nanotubes (CNT), and graphene are promising materials for enhancing SSB performance. Here’s a summary of their roles:
Graphene: A one-atom-thick, highly conductive material that can be used to improve the cathode or anode in SSBs. Graphene’s high thermal and electrical conductivity make it an excellent candidate for enhancing ion transfer and reducing internal resistance. It can also be mixed with ceramic or plastic to create a conductive solid-state electrolyte.
Carbon Nanofibers (CNF): Long, thin fibers with high surface areas, which can be used to create a conductive network in the solid-state electrolyte. CNF can improve the mechanical strength and flexibility of the electrolyte, making it more suitable for large-scale applications.
Carbon Nanotubes (CNT): Tiny, tubular structures with exceptional mechanical and electrical properties. CNTs can be used to create a conductive network or as a reinforcement material in the solid-state electrolyte, enhancing its mechanical strength and thermal stability.
Key Benefits:
Improved safety: Solid-state batteries with CNF, CNT, and graphene can reduce the risk of thermal runaway and explosions, as they eliminate the volatile liquid electrolyte.
Enhanced performance: The high conductivity and mechanical strength of these materials can lead to faster charging, higher energy density, and longer cycle life.
Scalability: The use of CNF, CNT, and graphene can enable mass production of SSBs, making them more viable for widespread adoption.
Challenges and Future Directions:
Scalable production: Developing cost-effective and scalable methods for producing high-quality CNF, CNT, and graphene is crucial for widespread adoption.
Interfacial resistance: Minimizing interfacial resistance between the solid-state electrolyte and electrodes remains a significant challenge.
Stability and durability: Ensuring the long-term stability and durability of these materials under various operating conditions is essential for reliable SSB performance.
Existing Research and Applications:
Graphene-based solid-state batteries have been demonstrated with promising results, including high energy density and fast charging capabilities.
CNF and CNT have been used in composite anodes for lithium-ion batteries, showing improved performance and cycle life.
Researchers are actively exploring the use of CNF, CNT, and graphene in solid-state electrolytes, aiming to create more efficient and scalable SSBs.
By leveraging the unique properties of CNF, CNT, and graphene, solid-state batteries can overcome the limitations of traditional lithium-ion batteries and become a more viable option for various applications, including electric vehicles and renewable energy systems.
Graphene: A one-atom-thick, highly conductive material that can be used to improve the cathode or anode in SSBs. Graphene’s high thermal and electrical conductivity make it an excellent candidate for enhancing ion transfer and reducing internal resistance. It can also be mixed with ceramic or plastic to create a conductive solid-state electrolyte.
Carbon Nanofibers (CNF): Long, thin fibers with high surface areas, which can be used to create a conductive network in the solid-state electrolyte. CNF can improve the mechanical strength and flexibility of the electrolyte, making it more suitable for large-scale applications.
Carbon Nanotubes (CNT): Tiny, tubular structures with exceptional mechanical and electrical properties. CNTs can be used to create a conductive network or as a reinforcement material in the solid-state electrolyte, enhancing its mechanical strength and thermal stability.
Key Benefits:
Improved safety: Solid-state batteries with CNF, CNT, and graphene can reduce the risk of thermal runaway and explosions, as they eliminate the volatile liquid electrolyte.
Enhanced performance: The high conductivity and mechanical strength of these materials can lead to faster charging, higher energy density, and longer cycle life.
Scalability: The use of CNF, CNT, and graphene can enable mass production of SSBs, making them more viable for widespread adoption.
Challenges and Future Directions:
Scalable production: Developing cost-effective and scalable methods for producing high-quality CNF, CNT, and graphene is crucial for widespread adoption.
Interfacial resistance: Minimizing interfacial resistance between the solid-state electrolyte and electrodes remains a significant challenge.
Stability and durability: Ensuring the long-term stability and durability of these materials under various operating conditions is essential for reliable SSB performance.
Existing Research and Applications:
Graphene-based solid-state batteries have been demonstrated with promising results, including high energy density and fast charging capabilities.
CNF and CNT have been used in composite anodes for lithium-ion batteries, showing improved performance and cycle life.
Researchers are actively exploring the use of CNF, CNT, and graphene in solid-state electrolytes, aiming to create more efficient and scalable SSBs.
By leveraging the unique properties of CNF, CNT, and graphene, solid-state batteries can overcome the limitations of traditional lithium-ion batteries and become a more viable option for various applications, including electric vehicles and renewable energy systems.
Ikke_viktig
21.07.2024 kl 21:33
2247
Det som jeg mener er viktig her er at selskapet klarer å lande en kontrakt med stort inntektspotensiale. Det vil snu helt om på caset da alle nå mener de ikke har et produkt og at teknologien er humbug. Det er derfor veldig viktig for selskapet å snu disse ondsinnede tungene og få inntekter på plass. Det vil fort bli en døråpner på andre områder. Så lenge BCS ikke tjener penger vil en DD kunne medføre manglende kontrakt. Det beste hadde vært om de inngikk noen mindre kontrakter først slik at de fikk noen ben å stå på og ikke kunne skvises i eventuelle forhandlinger/DD...
Redigert 21.07.2024 kl 21:33
Du må logge inn for å svare
FaderGem
21.07.2024 kl 20:11
2316
Eller bekymringer kan jo gjøre noe med allmenntilstanden til folk... Psykologien vil seire, alt etter som hvor man er i bildet.
FaderGem
21.07.2024 kl 20:10
2313
Dette kan jo også sammenlignes med propagandaen over hvor bra vaksinedosene var for allmuen, fra 6 mnd til 89 år.. ta alt med en klype salt, kun tiden vil vise hva som er rett. Så langt i BCS spor, så er det kun forbedringer som kan gjøres, ikke nedsetting av eget folks immunforsvar. Så langt, alt vel! Toget går i riktig retning, ikke med haltende bekymringer for noe annet.
kjylling
21.07.2024 kl 19:25
2345
Trøstepreik fra chatgpt og utskjelling over en lav sko. Her er det jammen høyt nivå. Gpt er forøvrig tvangsforet på alskens positive børsmeldinger fra hypende grønne batteriselskap fra de siste år, så den infoen som kommer fra den kverna burde en ta med en viss skepsis. Noen som kjenner til reelt antall aksjer i selskapet hvis man tar med opsjoner osv?
FaderGem
21.07.2024 kl 18:58
2361
Hvorfor har et amerikansk fotballag som oftest et cheerleader-team, som slenger rundt på hverandre i håp om at laget skal vinne? Hva gjør menigheten her? Satan til folk, folk er 🧑🦽 Surmula rullestolmisbrukere, det er det dere er, til krykkene har grunn for å svikte under armene på dere. Hva gjør dere da? Løper etter? Run Forest, Run!
FaderGem
21.07.2024 kl 17:58
2412
Og som Odd sier, litt latency i batterisegmentet akkurat nå, så flott da! Et aldri så lite spillerom for forbedringer til lægginga har frekvensert seg.
Noen tror de piller reker og ser på YouPorn, jeg tror de gjør noe helt annet.. men det er jo hodet til hver enkelt som bestemmer hva som skjer i fantasien. Her finnes ingen grenser, tydeligvis! 😏
Noen tror de piller reker og ser på YouPorn, jeg tror de gjør noe helt annet.. men det er jo hodet til hver enkelt som bestemmer hva som skjer i fantasien. Her finnes ingen grenser, tydeligvis! 😏
FaderGem
21.07.2024 kl 15:24
2490
Var selvfølgelig ikke for uten grunn de satte i gang denne batterilabben👌🏼 Smart trekk for fremtidens reise. Så har vi Rameez Razaq som fast inventar i denne labben, og dette vil jeg si er ingen hvem som helst. Mon tro hva denne hjernen får til med de andre hodene til stedet med tiden til hjelp.
Det skader neppe å prøve, de som mener bedre foruten bør ta seg en tur i skogen å gjemme seg under en stein i et par århundre til. Dette kan bli særdeles, unnskyld uttrykket, jævlig bra! :-)
Det skader neppe å prøve, de som mener bedre foruten bør ta seg en tur i skogen å gjemme seg under en stein i et par århundre til. Dette kan bli særdeles, unnskyld uttrykket, jævlig bra! :-)
Ikke_viktig
21.07.2024 kl 08:55
2666
How far are you in this process if you issue a news about reaching a milestone where you have created reference test cells
ChatGPT
Issuing a news update about reaching a milestone where you have created reference test cells suggests that you have made significant progress in the development process of next-generation battery materials. Here's what this typically indicates about your current status:
Material Development and Validation:
You have successfully developed and synthesized new battery materials that show promise based on initial laboratory tests.
Prototype Fabrication:
You have fabricated prototype reference test cells using these new materials. This involves assembling these materials into a functioning battery cell format, which is a critical step towards practical application.
Initial Performance Testing:
You have conducted preliminary performance tests on these reference test cells to validate their basic electrochemical properties and functionality. This includes measuring parameters like capacity, energy density, charge/discharge rates, and initial cycle life.
Proof of Concept:
You have demonstrated proof of concept that the new materials can be used to create functional battery cells, which is a major milestone in the development process.
Benchmarking:
You have likely conducted some benchmarking against existing battery technologies to showcase the potential advantages of your new materials.
Internal Validation:
Internal validation of the reference test cells has been completed, providing confidence that the new materials work as intended in a complete cell configuration.
Next Steps After Creating Reference Test Cells
Extended Testing and Optimization:
Conduct more extensive performance testing over a larger number of cycles and under various conditions to better understand the long-term stability and performance characteristics of the new materials.
Optimize the composition and fabrication process based on these tests to further enhance performance.
Scale-Up Experiments:
Begin scaling up the production of the new materials to produce larger quantities for further testing and potential pilot-scale production.
Safety and Reliability Testing:
Perform detailed safety and reliability tests, including thermal stability, abuse tests, and failure mode analysis to ensure the new materials are safe for commercial use.
Collaboration and Pilot Production:
Collaborate with industry partners to integrate the new materials into larger format cells and modules.
Initiate pilot production runs to test the manufacturing scalability and process integration.
Regulatory and Certification Processes:
Prepare for regulatory compliance and certification processes, ensuring that the new materials and battery cells meet all necessary standards and regulations for commercialization.
Commercialization Strategy:
Develop a commercialization strategy, including identifying potential markets, applications, and partnerships to bring the new battery technology to market.
Creating reference test cells is a significant milestone that indicates a solid foundation for further development, testing, and eventual commercialization of your next-generation battery materials.
ChatGPT
Issuing a news update about reaching a milestone where you have created reference test cells suggests that you have made significant progress in the development process of next-generation battery materials. Here's what this typically indicates about your current status:
Material Development and Validation:
You have successfully developed and synthesized new battery materials that show promise based on initial laboratory tests.
Prototype Fabrication:
You have fabricated prototype reference test cells using these new materials. This involves assembling these materials into a functioning battery cell format, which is a critical step towards practical application.
Initial Performance Testing:
You have conducted preliminary performance tests on these reference test cells to validate their basic electrochemical properties and functionality. This includes measuring parameters like capacity, energy density, charge/discharge rates, and initial cycle life.
Proof of Concept:
You have demonstrated proof of concept that the new materials can be used to create functional battery cells, which is a major milestone in the development process.
Benchmarking:
You have likely conducted some benchmarking against existing battery technologies to showcase the potential advantages of your new materials.
Internal Validation:
Internal validation of the reference test cells has been completed, providing confidence that the new materials work as intended in a complete cell configuration.
Next Steps After Creating Reference Test Cells
Extended Testing and Optimization:
Conduct more extensive performance testing over a larger number of cycles and under various conditions to better understand the long-term stability and performance characteristics of the new materials.
Optimize the composition and fabrication process based on these tests to further enhance performance.
Scale-Up Experiments:
Begin scaling up the production of the new materials to produce larger quantities for further testing and potential pilot-scale production.
Safety and Reliability Testing:
Perform detailed safety and reliability tests, including thermal stability, abuse tests, and failure mode analysis to ensure the new materials are safe for commercial use.
Collaboration and Pilot Production:
Collaborate with industry partners to integrate the new materials into larger format cells and modules.
Initiate pilot production runs to test the manufacturing scalability and process integration.
Regulatory and Certification Processes:
Prepare for regulatory compliance and certification processes, ensuring that the new materials and battery cells meet all necessary standards and regulations for commercialization.
Commercialization Strategy:
Develop a commercialization strategy, including identifying potential markets, applications, and partnerships to bring the new battery technology to market.
Creating reference test cells is a significant milestone that indicates a solid foundation for further development, testing, and eventual commercialization of your next-generation battery materials.
Ikke_viktig
21.07.2024 kl 08:54
2637
If your goals is to manufacture next generation battery materials why would you need a battery lab?
ChatGPT
If your goal is to manufacture next-generation battery materials, having a battery lab is essential for several reasons:
Material Characterization:
To thoroughly understand the properties of new materials, such as their electrochemical behavior, conductivity, stability, and interaction with other components of the battery.
Prototype Development:
To fabricate prototype batteries using the new materials and assess their real-world performance. This helps in transitioning from theoretical concepts and lab-scale materials to practical, usable battery components.
Performance Evaluation:
To conduct comprehensive performance testing of batteries made with the new materials. This includes evaluating metrics like energy density, power density, cycle life, charge/discharge rates, and overall efficiency.
Optimization and Refinement:
To optimize the composition and fabrication processes of the new materials to maximize their performance and compatibility within the battery system. Iterative testing and modification are often necessary to refine materials and processes.
Failure Analysis and Safety Testing:
To identify potential failure modes and safety issues associated with the new materials. Understanding how new materials behave under various conditions (e.g., overcharging, high temperatures) is crucial for ensuring the safety and reliability of the final battery product.
Integration with Existing Technologies:
To test how new materials integrate with existing battery technologies and components. Compatibility with current manufacturing processes and standards is key to practical implementation.
Benchmarking Against Standards:
To compare the performance of batteries with new materials against industry standards and existing technologies. This helps in demonstrating the advantages of the new materials and in making a compelling case for their adoption.
Environmental and Lifecycle Analysis:
To assess the environmental impact, recyclability, and overall sustainability of the new materials throughout the battery's lifecycle. This is increasingly important for meeting regulatory requirements and consumer expectations.
Collaboration and Scale-Up:
To collaborate with industry partners and scale up the production of new materials. Demonstrating the effectiveness of materials in a controlled lab environment is a critical step before moving to pilot and commercial-scale production.
Regulatory Compliance and Certification:
To ensure that batteries using new materials comply with relevant regulations and certification requirements. Rigorous testing in a lab setting is necessary to meet these standards and gain market approval.
In summary, a battery lab provides the necessary infrastructure and expertise to rigorously test, refine, and validate new battery materials, ensuring they are viable for practical applications and can be successfully integrated into commercial battery technologies.
ChatGPT
If your goal is to manufacture next-generation battery materials, having a battery lab is essential for several reasons:
Material Characterization:
To thoroughly understand the properties of new materials, such as their electrochemical behavior, conductivity, stability, and interaction with other components of the battery.
Prototype Development:
To fabricate prototype batteries using the new materials and assess their real-world performance. This helps in transitioning from theoretical concepts and lab-scale materials to practical, usable battery components.
Performance Evaluation:
To conduct comprehensive performance testing of batteries made with the new materials. This includes evaluating metrics like energy density, power density, cycle life, charge/discharge rates, and overall efficiency.
Optimization and Refinement:
To optimize the composition and fabrication processes of the new materials to maximize their performance and compatibility within the battery system. Iterative testing and modification are often necessary to refine materials and processes.
Failure Analysis and Safety Testing:
To identify potential failure modes and safety issues associated with the new materials. Understanding how new materials behave under various conditions (e.g., overcharging, high temperatures) is crucial for ensuring the safety and reliability of the final battery product.
Integration with Existing Technologies:
To test how new materials integrate with existing battery technologies and components. Compatibility with current manufacturing processes and standards is key to practical implementation.
Benchmarking Against Standards:
To compare the performance of batteries with new materials against industry standards and existing technologies. This helps in demonstrating the advantages of the new materials and in making a compelling case for their adoption.
Environmental and Lifecycle Analysis:
To assess the environmental impact, recyclability, and overall sustainability of the new materials throughout the battery's lifecycle. This is increasingly important for meeting regulatory requirements and consumer expectations.
Collaboration and Scale-Up:
To collaborate with industry partners and scale up the production of new materials. Demonstrating the effectiveness of materials in a controlled lab environment is a critical step before moving to pilot and commercial-scale production.
Regulatory Compliance and Certification:
To ensure that batteries using new materials comply with relevant regulations and certification requirements. Rigorous testing in a lab setting is necessary to meet these standards and gain market approval.
In summary, a battery lab provides the necessary infrastructure and expertise to rigorously test, refine, and validate new battery materials, ensuring they are viable for practical applications and can be successfully integrated into commercial battery technologies.
Solid State
21.07.2024 kl 03:05
2699
SOLGT ? Noen har også kjøpt ? ……….. eller….
Ingen har kjøpt pga den nye teknologien UTEN men pga uvitenhet.
Ingen har kjøpt pga den nye teknologien UTEN men pga uvitenhet.
Redigert 21.07.2024 kl 03:07
Du må logge inn for å svare
Heggøyen
20.07.2024 kl 20:37
2793
Måtte Odd fyre av en heidundrandes NEWSWEB melding nå som mange har solgt. Da skal man få løpe fort etter.
https://www.nordnet.no/market/stocks/17395516-quantum-scape-a
https://www.nordnet.no/market/stocks/17646555-solid-power-a
Fremtidens batteri ?
Disse firmaene har forsket på dette i MANGE år. Nå kommer resultatet
https://www.nordnet.no/market/stocks/17646555-solid-power-a
Fremtidens batteri ?
Disse firmaene har forsket på dette i MANGE år. Nå kommer resultatet
Redigert 20.07.2024 kl 20:08
Du må logge inn for å svare
FaderGem
20.07.2024 kl 19:07
2823
Eller du får se FaderGem vandrende i midten, hånd i hånd med Mor Blydt Svendsen og Awilco, i slow motion glise fra øre til øre da gjennombruddet kommer.
Lysbryteren får du leke med så mye du vil for min del.
Lysbryteren får du leke med så mye du vil for min del.
Ikke_viktig
20.07.2024 kl 17:22
2813
Så kan vi ta med den siste milestone de kom med:
We are proud to announce that our newly developed battery lab has successfully fabricated its first reference test cells! This significant achievement is a testament to our team's dedication and hard work in our ongoing efforts to innovate, conduct R&D, and optimize our green carbon products.
This milestone marks a new chapter in our journey toward advancing our green carbon products into next generation battery chemistries.
A big thank you to everyone involved in making this happen.
Lykke til...
We are proud to announce that our newly developed battery lab has successfully fabricated its first reference test cells! This significant achievement is a testament to our team's dedication and hard work in our ongoing efforts to innovate, conduct R&D, and optimize our green carbon products.
This milestone marks a new chapter in our journey toward advancing our green carbon products into next generation battery chemistries.
A big thank you to everyone involved in making this happen.
Lykke til...
Ikke_viktig
20.07.2024 kl 17:18
2806
what are coin cell battery labs for
ChatGPT
Coin cell battery labs are specialized facilities or setups used for the research, development, and testing of coin cell batteries, which are small, round, single-cell batteries commonly used in compact electronic devices like watches, calculators, hearing aids, and small medical devices. These labs focus on various aspects of coin cell battery technology, including:
Materials Research:
Investigating new materials for electrodes, electrolytes, and separators to improve battery performance, such as energy density, lifespan, and safety.
Developing and testing advanced materials like new cathode and anode materials, solid-state electrolytes, and novel separator materials.
Battery Design and Fabrication:
Designing and fabricating prototype coin cells to test new materials and battery chemistries.
Optimizing the design and manufacturing processes to enhance battery performance and reliability.
Performance Testing:
Conducting various tests to evaluate the performance of coin cells, including capacity, cycle life, charge/discharge rates, and thermal stability.
Testing batteries under different conditions to ensure they meet required standards and specifications for their intended applications.
Failure Analysis and Safety Testing:
Analyzing the failure modes of coin cell batteries to identify potential issues and improve their safety and reliability.
Conducting safety tests such as overcharge, short-circuit, and thermal runaway tests to ensure the batteries are safe for consumer use.
Electrochemical Analysis:
Performing electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and other electrochemical techniques to understand the behavior of battery materials and interfaces.
Investigating the electrochemical processes occurring within the battery to improve its efficiency and performance.
Prototyping and Scale-Up:
Developing scalable manufacturing processes for coin cell batteries to transition from laboratory prototypes to commercial production.
Collaborating with manufacturers to implement new technologies and materials in mass-produced coin cell batteries.
Environmental and Lifecycle Testing:
Assessing the environmental impact of coin cell batteries, including their recyclability and disposal.
Conducting lifecycle analysis to determine the overall sustainability of the battery technology.
Coin cell battery labs are crucial for advancing battery technology, enabling the development of more efficient, durable, and safer batteries for a wide range of applications.
CHATGPT svar
Så mens dere er desperate etter å få en lavere kurs så driver selskapet nå med R&D på høygir. Vi får se hvem som er inne og ute når/om/hvis de lykkes
ChatGPT
Coin cell battery labs are specialized facilities or setups used for the research, development, and testing of coin cell batteries, which are small, round, single-cell batteries commonly used in compact electronic devices like watches, calculators, hearing aids, and small medical devices. These labs focus on various aspects of coin cell battery technology, including:
Materials Research:
Investigating new materials for electrodes, electrolytes, and separators to improve battery performance, such as energy density, lifespan, and safety.
Developing and testing advanced materials like new cathode and anode materials, solid-state electrolytes, and novel separator materials.
Battery Design and Fabrication:
Designing and fabricating prototype coin cells to test new materials and battery chemistries.
Optimizing the design and manufacturing processes to enhance battery performance and reliability.
Performance Testing:
Conducting various tests to evaluate the performance of coin cells, including capacity, cycle life, charge/discharge rates, and thermal stability.
Testing batteries under different conditions to ensure they meet required standards and specifications for their intended applications.
Failure Analysis and Safety Testing:
Analyzing the failure modes of coin cell batteries to identify potential issues and improve their safety and reliability.
Conducting safety tests such as overcharge, short-circuit, and thermal runaway tests to ensure the batteries are safe for consumer use.
Electrochemical Analysis:
Performing electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and other electrochemical techniques to understand the behavior of battery materials and interfaces.
Investigating the electrochemical processes occurring within the battery to improve its efficiency and performance.
Prototyping and Scale-Up:
Developing scalable manufacturing processes for coin cell batteries to transition from laboratory prototypes to commercial production.
Collaborating with manufacturers to implement new technologies and materials in mass-produced coin cell batteries.
Environmental and Lifecycle Testing:
Assessing the environmental impact of coin cell batteries, including their recyclability and disposal.
Conducting lifecycle analysis to determine the overall sustainability of the battery technology.
Coin cell battery labs are crucial for advancing battery technology, enabling the development of more efficient, durable, and safer batteries for a wide range of applications.
CHATGPT svar
Så mens dere er desperate etter å få en lavere kurs så driver selskapet nå med R&D på høygir. Vi får se hvem som er inne og ute når/om/hvis de lykkes
Redigert 20.07.2024 kl 17:20
Du må logge inn for å svare
Solid State
20.07.2024 kl 14:21
2878
Greenlook
20.07.2024 kl 11:47
2949
Slettet brukerskrev Hvem er kundene til bcs ?
Ingen kunder, ingen inntjening, ingen kontrakter, ingen kommunikasjon og ingen produkt. Man kan jo lure på hvorfor man satte sparepengene her. Siste mann får slukke lyset, tipper det er FaderGem
FaderGem
20.07.2024 kl 01:29
1570
Føler ikke jeg hyler så mye, da er det vel ikke meg du sikter til. Men jeg vet hvor lett påvirkelig folk kan være fra det ene til det andre, uten å ha noen formening selv av hva som faktisk foregår rundt ørene på seg selv. Og det er veldig gøy å være vitne til. Vi får se hvordan det går, i dette tilfellet også. Det blir moro å se! :-)
Det er ikke sikkert FaderGem. Det må skje noe fundamentalt for at jeg kommer tilbake. Ikke bare noen hylene aksjonærer på Hegnar online
Redigert 20.07.2024 kl 01:14
Du må logge inn for å svare
Heggøyen
19.07.2024 kl 22:57
1582
Største kjøp i selskapet
Privatperson
Organisasjon
Aksjonær
Endring
1. NORDNET LIVSFORSIKRING AS
+26 733
2. MORGAN STANLEY & CO. INT. PLC.
+16 718
3. BOLSØY, STEFAN (f. '79)
+8 000
4. TESSEM, FRANK (f. '61)
+7 889
5. MØGSTER, JAN (f. '67)
+5 000
6. HOVDEN, JON (f. '56)
+4 975
7. BARCLAYS CAPITAL SEC. LTD FIRM
+4 930
8. SØNDRE HELLERUD GÅRD AS
+4 900
Største salg i selskapet
Privatperson
Organisasjon
Aksjonær
Endring
1. CITIBANK EUROPE PLC
-30 813
2. SØRENSEN, JAN MORTEN (f. '78)
-20 000
3. CLEARSTREAM BANKING S.A.
-11 250
4. BOFA SECURITIES EUROPE SA
-8 206
5. GJERDE, ARNE JOHAN (f. '65)
-7 000
6. STRAND, SIGURD EMIL (f. '97)
-5 000
Privatperson
Organisasjon
Aksjonær
Endring
1. NORDNET LIVSFORSIKRING AS
+26 733
2. MORGAN STANLEY & CO. INT. PLC.
+16 718
3. BOLSØY, STEFAN (f. '79)
+8 000
4. TESSEM, FRANK (f. '61)
+7 889
5. MØGSTER, JAN (f. '67)
+5 000
6. HOVDEN, JON (f. '56)
+4 975
7. BARCLAYS CAPITAL SEC. LTD FIRM
+4 930
8. SØNDRE HELLERUD GÅRD AS
+4 900
Største salg i selskapet
Privatperson
Organisasjon
Aksjonær
Endring
1. CITIBANK EUROPE PLC
-30 813
2. SØRENSEN, JAN MORTEN (f. '78)
-20 000
3. CLEARSTREAM BANKING S.A.
-11 250
4. BOFA SECURITIES EUROPE SA
-8 206
5. GJERDE, ARNE JOHAN (f. '65)
-7 000
6. STRAND, SIGURD EMIL (f. '97)
-5 000
FaderGem
19.07.2024 kl 20:48
1518
Slettet brukerskrev No , jeg er ferdig i bcs for nå men har noen gullkorn å komme med seinere😀
Du kommer tilbake da systemet ber deg om å gjøre det, regner jeg med. Norske Bulls er agnet, og du er gullfisken i akvariumet blandt alle de andre. 🌝
No , jeg er ferdig i bcs for nå men har noen gullkorn å komme med seinere😀
å hele tiden forsvare en håpløs investering ble slitsommt. det minner meg om Thinfilm. jeg er heldigvis ferdig med bcs og penga er investert i fremtidsaksjer. lykke til videre.
Kakemons
19.07.2024 kl 15:59
1545
Clearstream og Nordnet har i lang tid vært de største bidragsyterne til shorting i denne aksjen. Aksjelistene viser igjen og igjen at de låner bort aksjer til shorting. Dersom Clearstream selger seg ut er det positivt.
FaderGem
19.07.2024 kl 14:51
1593
Slettet brukerskrev Du trenger hjelp !
Morsomt at du enda ikke har innsett det selv. Følg flokken, mister; det er du god på! 🌝
😂😂😂nei denne eventyrfortellingen tror jeg ikke lenger på. good bai 😀Jeg har vært med alt for lenge. nå skal penga over i fremtidsaksjer slik at jeg blir bemidlet når jeg pensjonerer meg om noen 10 år. har tapt nok nå på dette bcs firmaet. jeg får heller komme tilbake hvis det er noe ordentlig som skjer. jeg har beholdt 1 aksje da 😂
må være riktig å kjøre sak mot JBS
jeg har beholdt 1 aksje da 😂
må være riktig å kjøre sak mot JBS
jeg har beholdt 1 aksje da 😂
Redigert 19.07.2024 kl 11:32
Du må logge inn for å svare
Mammon
19.07.2024 kl 10:09
1761
Slettet brukerskrev Hvem er kundene til bcs ?
Kundelisten er hemmelig siden man frykter at konkurrentene kan stjele dem akkurat samme grunn til at d ikke ble søkt patent 😆
Uendelige kundemasse i hue dems 🤣
Uendelige kundemasse i hue dems 🤣